Why Won’t My Oreck Air Purifier Turn on? Let’s Explore the Reasons

Oreck air purifiers don’t give operational problems often, but when they do, it can be a bit confusing, especially when you don’t know what to do. A common question that I often hear is; why won’t my Oreck air purifier won’t turn on? There can be many reasons, from faulty power outlets to clogged filters.

Fortunately for you, this article will tell you all the possible reasons for this issue. So, keep on reading and get on with troubleshooting!

Reasons Why Oreck Air Purifier Won’t Turn on and How to Troubleshoot Them

When your Oreck Air Purifier refuses to turn on, look for issues in the suggested area and proceed to take necessary actions after that.

  • Check Power Cord
Oreck Air Purifier Power Cord

Issues with the power cord are one of the simplest yet common reasons why your air purifier might not be turning on. If the power cord is already plugged into an outlet and it is still not turning on, then you need to first determine whether there is a fault with the power cord of the purifier or the power outlet.

Plug in the cord of a different appliance and check if it switches on. If it does, then there is likely no problem with the power outlet; rather, the problem probably lies with the power cord of the purifier.

However, if the different appliance doesn’t turn on when plugged in, the outlet might be at fault. You can either replace that outlet or switch to a working one.

  • Check Selector Switch

A faulty selector switch or wrongly configured one can be yet another reason why your air purifier unit is not switching on. Setting the selector switch for the desired blower speed or replacing a faulty one will get the job done by turning the purifier on.

  • A Loose Air Intake Grille

Sometimes a loose air intake grille can also be a reason why the Oreck air purifier turns on. It is imperative that the air intake grille is fastened securely and configured properly, or else it is highly likely that the Oreck air purifier will not turn on and function properly.

  • Clogged or Dirty Air Filters

Clogged or Dirty air filters are yet one more common reason why your air purifier refuses to turn on. In addition to that, even if it does switch on, it will make a lot of noise and will eventually stop working if not cleaned or replaced soon enough.

Air filters tend to get clogged quite often, especially in a place where the air pollutant level is higher than the average. In such cases, it is always recommended to change the air filters frequently when blocked and to also check for dirty filters occasionally as well.

This will prevent the air purifier from getting burdened by clogged or dirty filters.


If by any chance these pointers are still not working when looked at and checked, then it is advised to contact Oreck for services and utilize the warranty, if still admissible for any repairs and checkups. Oreck air purifiers are one of the best ones on the market.

Last Updated on November 27, 2022

Richard Hicks

Hello there! I hope you are enjoying your stay at my well-curated website. And I certainly am pleased to have you here. I hope that you got what got you here in the first place because that is the only thing that matters to my team and me. But that is not the end; there will be more content, such as the one that got you here.

1 thought on “Why Won’t My Oreck Air Purifier Turn on? Let’s Explore the Reasons”

Leave a Comment